Las Vegas
Handyman Co.
Electrical repair in a Las Vegas kitchen, a new GFCI outlet being installed in the backsplash

Electrical repairin Las Vegas.

Dead outlets, flickering lights, switches, dimmers and GFCI protection handled safely and to code.

Get your price in 60 seconds

Pick a job. We text you a flat quote.

What do you need?
5.0 from 67 reviewsYour number stays with us
5.0 ★67 Google reviews
5.0 ★Top Pro on Thumbtack
FaveRecommended on Nextdoor
InsuredEvery job covered

What's included

  • Outlets and switches
  • GFCI and USB outlets
  • Dimmers and smart switches
  • Troubleshooting

Electrical repair in Las Vegas for everyday problems

Electrical repair in Las Vegas homes is often less dramatic than it feels: an outlet that went dead, a light that flickers, a switch that crackles, or a dimmer that buzzes. Some of these are simple swaps. Others are signs of a loose connection that should be fixed before it gets worse.

A dead outlet often has nothing to do with the outlet itself. One GFCI outlet (the kind with test and reset buttons), often in a bathroom, the garage or outside, can protect several others down the line, and when it trips, everything after it goes dark. Finding and resetting it is the first step, and if it keeps tripping, the cause is somewhere on that circuit.

Some signs should not wait: a burning smell, scorch marks on a cover plate, an outlet that is hot to the touch, or a breaker that trips again the moment it is reset. Turn that circuit off at the panel and leave it off until it has been checked.

Monsoon season, outdoor outlets and loose wiring

Outdoor outlets take a beating here. Monsoon storms from mid-June through September drive rain and dust into covers that have cracked in the sun, and a wet outlet can trip its GFCI or corrode over time. A weatherproof in-use cover (the bubble style that stays closed with a cord plugged in) is what code calls for on outdoor outlets in wet locations.

Many outlets and switches in production-built homes were installed with backstabbed wires (pushed into holes in the back instead of wrapped around the screws). Those connections can loosen over time, causing flickering, warm cover plates and outlets that only work some of the time. The fix is to move the wires to the screw terminals or replace the device.

Smart switches, dimmers and what affects the price

Most smart switches and smart dimmers need a neutral wire in the switch box. Newer homes usually have one, but many 1970s to 1990s homes in Paradise, Spring Valley and older Henderson do not, which limits the choice of switch. We check the box before recommending a model.

Cost mostly comes down to how many devices, what kind, and how much troubleshooting is involved. Swapping ten outlets in one visit is predictable work. Tracking down a circuit that trips at random or lights that flicker in several rooms takes longer, because the cause has to be found before it can be fixed.

We are an insured local crew, and the written flat quote comes before any work starts. Adding new circuits or running wire to a new location is a bigger job than repair, and it can need a permit from Clark County or your city. We tell you up front when a job does.

Electrical repair questions.

Why does a GFCI outlet keep tripping?

A GFCI trips when it senses current leaking where it should not, often through moisture. Common causes are a wet outdoor outlet after a storm, a worn appliance cord, or an aging GFCI that has started to fail. Unplugging everything on the circuit and resetting it narrows things down, and if it trips with nothing plugged in, the wiring or the device needs a closer look.

Can regular outlets be swapped for USB outlets?

In most standard boxes, yes. USB outlets are deeper than regular ones, so a crowded or shallow box may need a different model or a box extension. They are a good fit for kitchens, nightstands and home offices. Outlets in bathrooms, at kitchen counters, in garages and outdoors still need GFCI protection, either built into the outlet or from one upstream.

Why does only half of an outlet work?

In many rooms, one half of an outlet is wired to a wall switch so a lamp can be turned on at the door. Before calling it broken, try the switches in the room. If neither the switch nor a GFCI reset brings it back, the outlet or a connection behind it has likely failed, and replacing it is usually a simple repair.

Tell us
what's broken.